TITAN SH-SERIES (up to 16 tons)


Titan_SH-Series_HoistCondra’s SH (Short Headroom) Titan hoists are designed to make maximum use of expensive factory space – headroom as well as floor – for capacities up to 16 tons.

Based on the massively successful K-Series, this new design has reduced the size of many of the original components to take height out of the final crane assembly and deliver a profile some 20% lower than its predecessor and resulting in an extra lift height.

 

  • Lifting capacities to 16 tons
  • Many additional featuresThe SH-Series incorporates refinements such as automatic rope tensioning, smoother travel, a built-in load limiter, standardised direct drive and universal carriage.
  • Lower profile
    Hoist profile of the Titan Series-SH is some 20% less than it’s predecessor.
  • Reduced construction costs
    Installing a crane with reduced height requirements can deliver huge savings during factory construction by lowering the entire roof.
  • Greater lift height
    Extra lift height means the ability to take on projects that other factories cannot.

 

TITAN COMPACT SERIES (up to 32 tons)


Titan Compact HoistCondra’s Titan compact double girder hoists deliver all the modular capabilities of the earlier K-Series in any application, but in a refined and more compact design.

 

 

 

 

  • Lifting Capacities to 32 tons
  • Multiple standard features
    Features on all models include electromagnetic DC disc brakes, standard frame-size motors with parallel rotors, double-acting limit switches, solid bronze rope guides and totally enclosed splash-lubricated gearboxes.
  • Many additional refinements
    The Compact Series also incorporates refinements such as automatic rope tensioning, smoother travel, a built-in load limiter, standardised direct drive and universal carriage.
  • Inexpensive spare parts
    Long production runs of standard spares mean ready parts available and lower priced parts.
  • Low maintenance costs
    Lower spares costs deliver big savings over the long term.

K-SERIES HOISTS (up to 250 tons in standard and high-lift)


Condra_K-SeriesManufactured since 1972, Condra’s rugged, robust K-Series hoists have been installed worldwide under a wide variety of operating conditions in three main configurations: foot-mounted, monorail and double-rail crab. Lifting and reeving arrangements include centre-lift.
 

 

 

 

 

 

  • Lifting capacities to 250 tons
    Fully covered K-Series hoists provide lifting capacities to 32 tons, while open-drum units have capacities in excess of 250 tons.
  • Many standard features
    Features on all models include electromagnetic DC disc brakes, standard frame-size motors with parallel rotors, double-acting limit switches, solid bronze rope guides and totally enclosed splash-lubricated gearboxes. Variable speed is available on request.
  • Very high lift capability
    The K-Series is the market leader in high-lift applications, proven in installations with lift heights up to 150 meters. These hoists are dependable, durable and robust under the conditions of increased mechanical strain typically found in high-lift applications.
  • Inexpensive spare parts
    Long production runs of standard spares mean ready parts availability and lower priced parts. Low maintenance costs. Lower spares costs deliver big savings over the long term.